Circutor CVM-C10 Series Instrukcja Użytkownika Pobierz pdf (Strona 52)

 Programming the latch

The interlocking is selected on this screen, i.e., if the alarm is

interlocked after it has been tripped, even when the condition that

triggered it has disappeared.

Press key

for 3 seconds to edit the selection. The prog icon

will be displayed on the bottom of the screen.

Press key

to browse the two options (Yes and No).

To validate the data, press for 3 seconds and the prog icon will disappear from the display.

Press key to access the next programming step.

Note: If the unit is reset, the status of alarms is deleted and all alarms will return to the

programmed standby status, provided that the condition that triggered them has been resolved.

 Programming the time delay 2

The alarm disconnection delay is programmed on this screen in

seconds.

Press key

for 3 seconds to edit the maximum value selection.

The prog icon will be displayed on the bottom of the screen.

To enter or modify the value, press the

key repeatedly,

increasing the value of the ashing digit.

When the desired value is shown on the screen, move onto the next digit by pressing the key

to modify the other values.

If you press the key after changing the last digit, it will jump back to the rst digit so you

can modify the previously programmed values again.

To validate the data, press for 3 seconds and the prog icon will disappear from the display.

Press key to access the next programming step.

CVM-C10

Instruction Manual

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 81 82

Brak uwag

Circutor CVM-C10 Series Instrukcja Użytkownika Strona 52