Circutor DHB Series Instrukcja Użytkownika Pobierz pdf (Strona 8)

Fig. 3. Overall Dimensions

Fig. 2. Meter Fixing

4. INSTALLATION

The meter has separable strips with screw terminals, which enable the

connection of external wires of 1.5 mm

cross-section for input signals

and 2.5 mm

for other signals.

One must prepare a hole of 92

+0,6

´ 45

+0,6

mm in the panel, which the

thickness should not exceed 6 mm.

The meter is adapted to be mounted in a panel. The meter must be

introduced from the panel front with disconnected supply voltage. Be-

fore the insertion into the panel, one must check the correct placement

of the seal. After the insertion into the hole, fix the meter by means of

clamps (fig.2).

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 49 50

Brak uwag

Circutor DHB Series Instrukcja Użytkownika Strona 8