Circutor DHB Series Instrukcja Użytkownika Pobierz pdf (Strona 13)

The pressure of the push-button combination and hol-

ding down them during ca 3 seconds causes the deletion of alarm signa-

ling. This operation acts only when the support function is switched on.

The pressure of the push-button combination causes

the erasing of the minimal value.

The pressure of the push-button combination causes

the erasing of the maximal value.

The pressure and holding down the push-button during ca 3

seconds causes the entry to the programming matrix. The program-

ming matrix can be protected by a safety code.

The pressure and holding down the push-button during ca 3

seconds causes the entry to the menu monitoring meter parameters.

One must move through the monitoring menu by means of and

push-buttons. In this menu, all programmable meter parame-

ters are available only for readout. In this mode, the menu Ser is not

available. The exit from the monitoring menu is carried out by means of

the push-button. In the monitoring menu, parameter symbols

are displayed alternately with their values.

The service algorithm of the meter is presented on the fig. 8.

The appearance of the symbols mentioned below on the display

means:

- Incorrectly introduced safety code.

- Overflow of the upper measuring range.

- Overflow of the lower measuring range.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 45 46

Brak uwag

Circutor DHB Series Instrukcja Użytkownika Strona 13