Circutor CEM-M-RS-485 Instrukcja Użytkownika Pobierz pdf (Strona 12)

Table 3:LINK LED, colour codes�

LINK LED

Colour Status

Flashing red Unit not linked

Steady green Unit linked

COMS LED: Flashes with each transmission made by the RS-485 port.

4.3.- OPTICAL COMMUNICATIONS PORT

The unit has an optical serial communications port on its right side, in accordance with the UNE

EN 62056-21:2003 standard, in order to communicate with other devices in the CEM family.

4.4- RS-485 COMMUNICATIONS

4�4�1�- MODBUS PROTOCOL

The MODBUS protocol is a communication standard in the industry that enables the network

connection of multiple units, where there is a master and multiple slaves. Within the MODBUS

protocol the CEM M-RS485 uses the RTU (Remote Terminal Unit) mode.

In RTU mode, message starts and ends are detected with silences of at least 3.5 characters,

and the 16-bit CRC error-detection method is used.

The MODBUS functions implemented in the unit are:

Functions 03 and 04. Reading logs.

Function 10. Writing multiple logs.

4�4�2�- READ COMMANDS

The CEM M-RS485 supports integer type read functions: 0x03 and 0x04.

The unit's Modbus variables are specied in Table 4.

Example: Reading of the unit's serial number with peripheral number 01.

We will send the following Modbus frame:

Address Function Initial log Log no� CRC

01 04 2710 0002 CRC

CEM M-RS485

Instruction Manual

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

Brak uwag

Circutor CEM-M-RS-485 Instrukcja Użytkownika Strona 12