Circutor AR5L Series Instrukcja Użytkownika Pobierz pdf (Strona 38)

6.1.2.4.- PARAM: Choosing the parameters to be saved

As said before, parameters to be saved in memory are user-definable when

working with STD files.

 Pressing [ENTER] previously user-defined parameters are automatically

validated.

- To modify:

 Place over the desired parameter with keys [6

6], [5

5], [8

8] or [3

3].

 Pressing [SET] the state of the parameter switches. Parameters to be

saved are on a black background, and the ones to be not save are on a

white background.

 Placing over the text Inst (Instantaneous values) and pressing [SET], you

can now select the maximum values to be saved (MAX).

 Placing over the text Max (Maximum values) and pressing [SET], you can

now select the minimum values to be saved (MIN).

 Placing over the text MIN (Minimum values) and pressing [SET],you can

now select the parameters of harmonics that will be kept. Including the

number of harmonics(30 or 50), V and I for each phase and neutral current

(only in AR5-L model)

 Press [ENTER] to validate the choice or [ESC] to exit with no modification.

Note:

- In case that have been selected some not-compatible parameters with the

active measuring circuit, when exiting Setup, analyzer will warn the user

about this fact and will automatically unselect such wrong parameters.

- If values the parameters to be stored are changed, when exiting setting

actions, the display will show:

“Error: New file should be created”

This message is shown since the change of parameters in an already existing file

is not allowed. Follow these instructions to change the parameters of a file:

1. If you want to keep the file name.

• Stop analyzer data recording process: SET -> RUN -> Stop.

• Exit SETUP.

• Delete the existing file: SET -> FILES -> DELETE.

• Modify the parameters to be saved: SET -> RECORD -> PARAM

• Enable the analyzer data recording process: SET -> RUN -> Run

• Exit SETUP.

2. If you want to change the file name.

• Change the file name: SET -> RECORD -> NAME.

• Modify the parameters to be saved: SET -> RECORD -> PARAM

• Exit SETUP.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 51 52

Komentarze do niniejszej Instrukcji

Brak uwag

Circutor AR5L Series Instrukcja Użytkownika Strona 38

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Urządzenia pomiarowe Circutor AR5L Series